粉末冶金線上成型 關鍵尺寸檢測系統 2023/08/14

• 壓出品質檢測模組：上下對照高精度雷射尺寸量測、精密雙軸微動平台、Z軸升降平台，可針對斷差檢測、內孔、外徑量測。
• 高精度3D關鍵尺寸量測：重覆檢測誤差+/- 0.01 mm、近端檢測寬度≤ 23mm、遠端檢測寬度 ≤ 35mm、檢測深度 ≤ 40mm，零件內凹處深寬比例需 ≤2.5,單次檢測速度 ≤0.5秒/次。
• Extrusion quality inspection module: high-precision laser dimension measurement with upper and lower comparison, precise two-axis micro-motion platform, Z-axis lifting platform, which can be used for step detection, inner hole and outer diameter measurement.
• High-precision 3D key dimension measurement: repeated detection error +/- 0.01 mm, near-end detection width 23 mm, far-end detection width 35 mm, detection depth 40 mm, the depth-width ratio of the inner concave part of the part must be 2.5, single detection speed 0.5 seconds / time.

應用與效益 Applications and Benefits

• 協助國內粉末冶金成型業者（A公司）有效提升產線品質與良率。產能提升40%、品質良率提升50%。
• Assist the domestic powder metallurgy molding industry（Company A）to effectively improve the quality and yield of the production line. Production capacity increased by 40%, and quality yield increased by 50%.